描述

FT232BL/RL USB 轉 TTL 串口模組  FT232模組 USB轉串口 , USB轉TTL , Arduino 韌體升級下載 刷機板 FT232BL/RL 金色版本

  • 採用原裝FT232BL工業級晶片,外置EEPRON(93C46)更穩定, 支持Windows 10
  • 支持3種供電模式:5V對外供電;3.3V對外供電;由外部供電(要求3.3V-5V)
  • 帶3個LED:TXD LED、RXD LED、POWER LED
  • GND、RXD、TXD、3V3、5V:採用彎排針引出
  • 其餘功能PIN:預留焊盤CTS、RTS
  • 帶500MA自恢復保險絲反接不燒

 

應用案例:

RS-232傳統器件升級為USB
USB轉RS-232串行適配器
使用說明:(以接入MCU為例)

GND:接GND
RXD:接MCU.TX ( 信號流向:MCU.TX >> FT232 >> PC.RX )
TXD:接MCU.RX ( 信號流向:MCU.RX << FT232 << PC.TX )
3V3/5V:輸出3.3V或5V(模塊由USB供電,須將跳線帽跳到3.3V或5V)
RTS:接MCU.CTS ( 信號流向:MCU.CTS << FT232 << PC.RTS )
CTS:接MCU.RTS ( 信號流向:MCU.RTS >> FT232 >> PC.CTS )

FT232 module USB serial USB TTL upgrade download brush plate FT232BL RL

The FT232 module USB serial USB TTL upgrade download brush plate FT232BL RL tuhao gold
Material:metal
Product characteristics:
Using FT232BL industrial chip, external EEPRON (93C46) more stable
Support Windows 10
Support 3 power supply modes: 5V external power supply; Three3V external power supply; external power supply (request 3.3V-5V)
Take 3 LED:TXD, LED, RXD, LED, POWER, LED
GND, RXD, TXD, 3V3, 5V: the bent pin out
Other functions PIN: reserved pads, CTS, RTS
With 500MA self recovery fuse, not connected to burn
Application case:
RS-232 traditional device upgraded to USB
USB to RS-232 serial adapter
Directions for use (to access MCU as an example)
GND: OK, GND
RXD: connect MCU.TX (signal flow: MCU.TX, FT232, PC.RX)
TXD: connect MCU.RX (signal flow direction: MCU.RX, FT232, PC.TX)
3V3/5V: output 3.3V or 5V (the module is powered by USB, jump the jumper cap to 3.3V or 5V)
RTS: connect MCU.CTS (signal flow direction: MCU.CTS, FT232, PC.RTS)
CTS: connect MCU.RTS (signal flow: MCU.RTS, FT232, PC.CTS)

商品評價

目前沒有評價。


搶先評價 “FT232BL/RL USB 轉 TTL 串口模組”