特價

Pycom Expansion Board 3.0 最新版 Pycom 擴展板 支援 WiPy, LoPy, FiPy, GPy, SiPy

NT$1,180 NT$950

3 件庫存

描述

Pycom Expansion Board 3.0 Pycom 擴展板 支援 WiPy, LoPy, FiPy, GPy, SiPy 2018 最新推出 Pycom 擴展板 3.0

Pycom Expansion Board 3.0  Pycom 擴展板3.0,兼容 WiPy 2.0,WiPy 3.0,LoPy,LoPy4,SiPy,FiPy和GPy。 你的 Pycom 開發板需要一些編程的方式,而這正是這塊板子的用途!Pycom 擴展板3.0 使您可以隨處創建和連接新的物聯網項目,包括 WiPy 2.0,WiPy 3.0,LoPy,LoPy4,SiPy,FiPy和GPy!隨著幾十個準備好使用模板和庫,開發一個新的物聯網解決方案現在更容易,更快。每個擴展板均可通過micro USB或LiPo JST供電,適用於100mA或450mA電池,並具有自定義PIC USB至串行轉換器,並具有自動引導加載程序模式以編程Pycom開發板。還有一個板載microSD卡插槽可以增加所需電路板的存儲容量。

注意:請注意,如果您對我們提供的 LoPy4 以及上面列出的任何其他Pycom闆卡進行編程,則需要此擴展板。

Pycom Expansion Board 3.0  特徵

  • USB和LiPo電池供電
  • 自定義PIC USB轉串口轉換器,具有自動啟動加載器模式
  • LiPo電池充電器(BQ24040),可選擇兩種不同的充電電流(100mA和450mA)
  • TPS2115A具有反向電壓保護功能
  • MicroSD卡插槽
  • JST型電池連接器
  • 電源LED和充電狀態LED
  • 一個用戶LED和一個用戶開關
  • 輕鬆進入“安全模式”按鈕
  • 通過WiPy ADC監控電池電壓
  • 大量的跳線來啟用/禁用功能

Pycom Expansion Board 3.0

資源與文件下載

Your Pycom module will need some way to be programmed and that’s exactly where this board comes in! The Pycom Expansion Board 3.0 allows you the means to create and connect new IoT projects with your WiPy 2.0, WiPy 3.0, LoPy, LoPy4, SiPy, FiPy, and GPy everywhere! With dozens of ready to use templates and libraries, developing a new IoT solution is now easier and faster.

Each Expansion Board can be powered via micro USB or LiPo JST for 100mA or 450mA batteries and features a custom PIC USB to serial converter with an automatic bootloader mode to program your Pycom development board. There is also an on-board microSD card slot to increase the storage capacity of your desired board.

Note: Please be aware that this Expansion Board is required if you with to program the LoPy4 that we carry as well as any of the other Pycom boards listed above.

  • USB and LiPo battery powered
  • Custom PIC USB to serial converter with automatic bootloader mode
  • LiPo battery charger (BQ24040), with options for two different charging currents (100mA and 450mA)
  • TPS2115A with reverse voltage protection
  • MicroSD card slot
  • JST style battery connector
  • Power LED and charge status LED
  • One user LED and one user switch
  • Button to enter into “safe mode” easily
  • Battery voltage monitoring via the WiPy ADC
  • Lots of jumpers to enable/disable features

DOCUMENTS

商品評價

目前沒有評價。

搶先評價 “Pycom Expansion Board 3.0 最新版 Pycom 擴展板 支援 WiPy, LoPy, FiPy, GPy, SiPy”

發佈留言必須填寫的電子郵件地址不會公開。 必填欄位標示為 *