描述

MI:pro Case for micro:bit 美國 SparkFun 原裝進口

MI:pro 是 micro:bit 專用的保護盒,設計有壁掛孔,能夠將 micro:bit 裝到任何您想要的表面上,並將所有 micro:bit 上的按鈕和端口引出。

MI:pro是 micro:bit 的簡單而緊湊的保護套。這些案例具有三層構造風格,能夠將整個組件掛裝到任何需要的表面上,同時還可以訪問 micro:bit 上的所有按鈕和端口。雖然這些情況下都具有壁掛式標籤,但使用外殼的最大好處是不會意外地縮短 micro:bit 背面的焊盤。

結構簡單,只需要一個小的一字螺絲刀,並包括將每個板層疊在一起,圍繞微型鑽頭,並將其擰入到位。幸運的是,MI:pro的情況下,可以輕鬆訪問micro:bit底部的邊緣引腳,使其仍然可以插入許多載板上的邊緣連接器。唯一不能與MI:pro一起使用的電路板是 SparkFun 玩家:由於其邊緣連接器位於電路板的中心。

MI:pro Case for micro:bit

The MI:pro is a simple and compact protective case for the micro:bit. These cases feature a three-layer construction style with ability to wall-mount the whole assembly onto any surface you want while still providing access to all buttons and ports on the micro:bit. Though these cases do feature wall-mountable tabs, the biggest benefit of using a case is to not accidentally short out the pads on the back of the micro:bit. Construction is simple, requiring only a small flathead screwdriver, and involves layering each plate on top of one another around the micro:bit and screwing it into place. Luckily, the MI:pro case enables easy access to the edge pins at the bottom of the micro:bit, allowing it to still be plugged into an edge connector found on many of our carrier boards. The only board that cannot be used in conjunction with the MI:pro case is the SparkFun gamer:bit due to its edge connector being located in the center of the board. Note: The MI:pro case only includes the parts found below. This case does NOT include a micro:bit, power source or mounting screws. These items will need to be purchased separately.

FEATURES

INCLUDES

  • 1x Front Plate
  • 1x Back Mounting Plate
  • 2x Mid-layer Plate
  • 4x M3 Nylon Machine Screw
  • 4x M3 Nylon Full Nut

DOCUMENTS