描述

Gravity:Arduino 工業用模擬類比 pH 酸鹼值檢測套件/ Meter Pro 套件 可長時間持續監測

Gravity:Arduino 工業用模擬類比 pH 酸鹼值檢測套件 是一款帶有工業電極的專業 Arduino pH 傳感器儀表套件。arduino的工業ph傳感器內置簡單、方便、實用的連接和長壽命(長達1年),非常適合長期在線監測。它有一個用作電源指示燈的 LED、一個 BNC 連接器和一個 PH2.0 傳感器接口。要使用它,只需將 pH 傳感器與 BND 連接器連接,然後將 PH2.0 接口插入任何 Arduino 控制器的模擬輸入端口。如果編程,您將輕鬆獲得 pH 值。

這種工業 pH 電極由低阻抗的敏感玻璃膜製成。它可用於各種 PH 測量,具有快速響應和出色的熱穩定性。重現性好,不易水解,可消除鹼鹼誤差。在 0pH 到 14pH 範圍內,輸出電壓是線性的。由Ag/AgCl凝膠電解質鹽橋組成的參比體系具有穩定的半電池電位和優異的抗污染性能。環形聚四氟乙烯膜不易堵塞,適合長期在線檢測。

注意:收到包裹後!您可能會在保護泡沫上發現一些白色顆粒,這是從蓋子上結晶的氯化鉀。請不要擔心包裝盒中出現結晶,這是正常的。實際上,由於液體運輸限制,我們將KCL3N溶液倒在瓶蓋中,包裝盒中的輕微結晶應該是殘留物洩漏。無論如何,一旦您收到探頭,應將其存放在 KCL3N 溶液中,不能將其置於乾燥的環境中。

應用

  • 水質監測
  • 水產養殖

規格

  • 模塊電源:5.00V
  • 模塊尺寸:43mmx32mm(1.70″x1.26″)
  • 測量範圍:0-14PH
  • 測量溫度:0-60℃
  • 準確度:±0.1pH(25℃)
  • 響應時間:≤1min
  • 帶 BNC 連接器的工業 pH 電極
  • PH2.0接口(3腳貼片)
  • 增益調節電位器
  • 電源指示燈 LED

資源與文件

Gravity: Analog pH Sensor / Meter Pro Kit For Arduino

Gravity: Analog pH Sensor / Meter Pro Kit For Arduino Overview

 

Gravity: Analog pH Sensor / Meter Pro Kit For Arduino is a professional Arduino pH Sensor Meter Kit with an industrial electrode. Industrial ph sensor for arduino has a built-in simple, convenient, practical connection and long life (up to 1 year), which makes it very suitable for long-term online monitoring. It has an LED that works as the Power Indicator, a BNC connector, and a PH2.0 sensor interface. To use it, just connect the pH sensor with the BND connector, then plug the PH2.0 interface into the analog input port of any Arduino controller. If programmed, you will get the pH value easily. You may also check Liquid Sensor Selection Guide to get better familiar with our liquid sensor series.

This industrial pH electrode is made of a sensitive glass membrane with low impedance. It can be used in a variety of PH measurements with fast response and excellent thermal stability. It has good reproducibility, is difficult to hydrolysis, and can eliminate basic alkali error. In 0pH to 14pH range, the output voltage is linear. The reference system which consists of the Ag/AgCl gel electrolyte salt bridge has a stable half-cell potential and excellent anti-pollution performance. The ring PTFE membrane is not easy to be clogged, so the electrode is suitable for long-term online detection.

APPLICATIONS

  • Water Quality Surveillance
  • Aquaculture

SPECIFICATION

Gravity: Analog pH Sensor / Meter Pro Kit For Arduino TECH SPECS

  • Module Power: 5.00V
  • Module Size : 43mmx32mm(1.70″x1.26″)
  • Measuring Range:0-14PH
  • Measuring Temperature:0-60 ℃
  • Accuracy : ± 0.1pH (25 ℃)
  • Response Time: ≤ 1min
  • Industry pH Electrode with BNC Connector
  • PH2.0 Interface (3-foot patch )
  • Gain Adjustment Potentiometer
  • Power Indicator LED

DOCUMENTS

SHIPPING LIST

  • Industry pH electrode(BNC connector) x1
  • pH sensor circuit board x1
  • Analog cable x1

商品評價

目前沒有評價。


搶先評價 “Gravity:Arduino 工業用模擬類比 pH 酸鹼值檢測套件/ Meter Pro 套件 可長時間持續監測”