描述

Arduino Nano 33 IoT with headers 物聯網開發板 Arduino官方 台灣正式代理

Arduino Nano 33 IoT 將WiFi和Bluetooth®連接與低功耗架構結合在一起，形成了一種經濟高效的互聯項目解決方案。Arduino Nano 33 IoT與Arduino IoT Cloud完全兼容。設備支持完整的TLS安全傳輸。ATECC608A加密晶片將加密密鑰存儲在硬件中，從而提供了很高的安全性。與Arduino IoT Cloud的集成提供了一種有效的方式來設置在線儀表板，而無需編寫代碼和花費最少的精力。Nano 33與Arduino Nano大小相同，並擁有Arm Cortex-M0 + SAMD21處理器，基於ESP32的WiFi和藍牙模塊。Nano 33還具有6軸慣性測量單元（IMU）和可安全存儲證書和預共享密鑰的加密晶片。將電路板用作麵包板（安裝排針時）或SMT模塊，可通過帶齒的焊盤直接焊接。

硬體規格與特色

• 核心：SAMD21
• 時鐘：最高48MHz
• 閃存：256KB
• SRAM：32KB
• NINA W13（可以用作Wifi或藍牙）
• ECC608加密晶片
• 電路電壓3.3V
• I / O：8個模擬引腳，14個數字引腳，
• 接口：1 UART // 1 SPI // 1 I ² C
• 尺寸：45x25mm

主要特徵

1. 帶有6軸IMU的安全WiFi和藍牙連接。
2. 帶有外部處理器的預認證模塊可確保在編寫應用程序代碼時保持RF合規性，而在修改代碼會影響認證的情況下，與ESP32模塊相比則可確保如此。
3. 板載DC-DC電源使該板可以上電至21V，從而保持高效率，並為外部設備提供大量電流而不會過熱。與市場上其他具有LDO並在高壓下供電時會發熱很多的產品相比，這是一個很大的改進。

應用領域

1. 為所有現有的Arduino Nano應用程序添加具有強大安全性的WiFi和藍牙連接。
2. 機載IMU具有輕巧緊湊的外形，可用於無線監控小物體的振動，方向和旋轉速度。
3. 鉛或多節鋰離子電池的高電壓直接運行，可為外設提供3.3V電源，並提供可觀的輸出電流。

ARDUINO NANO 33 IOT WITH HEADERS

This small, robust and powerful board has WiFi and Bluetooth connectivity that combined with its low power architecture makes it a practical and cost effective solution for your connected projects.

Arduino Nanof 33 IoT is fully compatible with the Arduino IoT Cloud and supports full TLS secure transport: the ATECC608A cryptochip stores the cryptographic keys in hardware, offering a very high level of security for this class of products. The integration with the Arduino IoT Cloud offers also a very efficient way of setting up online dashboards with little coding and minimal effort .

In the same iconic size of the Arduino NANO, the Arduino Nano 33 IoT hosts an Arm Cortex-M0+ SAMD21 processor, a WiFi and Bluetooth module based on ESP32, a 6 axis Inertial Measurement Unit (IMU) and a crypto chip which can securely store certificates and pre shared keys.

The board can either be used in a breadboard (when mounting pin headers), or as a SMT module, directly soldering it via the castellated pads.

Arduino Nano 33 BLE

Arduino Nano 33 BLE is a compact board built around the NINA B306 module,  based on the Nordic nRF52840 and containing a powerful Cortex M4F. The Nano 33 BLE features an architecture that is fully compatible with Arduino IDE Online and Offline. The device has a 9 axis Inertial Measurement Unit (IMU) and reduced power consumption compared to other same size boards. This allows for designing wearable devices and movement sensing projects that need to communicate at  close range. Arduino Nano 33 BLE is ideal for automation projects thanks to the multiprotocol BT 5.0 radio.