特價

10.1 吋 IPS 800×1280 mini-hdmi 樹莓派 高清液晶螢幕 支援樹莓派 4 與 windows

NT$3,100 NT$2,667

5 件庫存

描述

10.1 吋 IPS 800×1280 mini-hdmi 樹莓派 高清液晶螢幕 支援樹莓派 4 與 windows

10.1 吋 IPS 800×1280 mini-hdmi 高清液晶螢幕 是一款高性價比10.1英寸IPS高清屏,採用mini-HDMI視頻信號輸入,支持800×1280高清輸出。屏幕採用micro-USB供電方案,最低僅需500mA的電流,即可點亮屏幕,還可通過USB口,調節背光亮度,最大支持100級背光調節。屏幕支持Linux,Windows,MACOS等三大主流操作系統,可以直接配合樹莓派(Raspberry Pi),拿鐵熊貓(Lattepanda)及其他帶有HDMI輸出的設備使用,基本可以做到全平台兼容。

注意: 此屏幕為豎屏,樹莓派等Linux系統可通過config.txt配置文件來旋轉屏幕,配置文件見產品維庫;Windows系統在第一次使用的時候,請在系統內翻轉屏幕角度。當使用樹莓派供電時,需確保樹莓派有足夠供電能力,屏幕大約會消耗0.5A@5V的電流,所以請注意電源適配器的供電輸出,在扣除0.5A電流的情況下依舊要保證樹莓派能夠穩定工作。

屏幕的micro-USB口和mini-HDMI口需接在同一設備上,保證信號共地,否則會出現閃屏等問題。

特性

  • mini-HDMI接口輸入
  • USB 5V@500mA供電

DFR0615可视角

技術規格

  • 屏幕尺寸:10.1”
  • 屏幕分辨率:800×1280(WXVGA)
  • 視頻信號接口:Mini-HDMI
  • 屏幕色彩:16.7M色
  • 亮度:200cd/m2(支持0~100分級)
  • 工作電流:5V@500mA(micro-USB)
  • 屏幕:16.7M colors
  • 支持系統:Linux/Windows/MacOS
  • 屏幕尺寸:245mm×160mm×9mm
  • 顯示區域:135.36mm×216.68mm

配送清單

  • 10.1″ 800×1280 mini-HDMI IPS高清屏 x1
  • Mini-HDMI to HDMI線 x1
  • Mini-HDMI to Micro-HDMI線(配樹莓派4用) x1
  • Micro-USB線 x1

相關文檔

10.1″ 800×1280 mini-HDMI IPS Display(Compatible with Raspberry Pi & LattePanda)

INTRODUCTION

This is a 10.1″ mini-HDMI IPS Display with 800 × 1280 resolution. It supports mini-HDMI video signal input and microUSB power supply. It only requires 500mA to light up the screen and you can adjust the backlight brightness through the USB port. It supports 100-level backlight adjustment, you can use script to control the brightness. The screen supports three major operating systems such as Linux, Windows, and MACOS, especially the Raspberry Pi. It works directly with Raspberry PiLattePanda, and other devices with HDMI output, which can basically achieve full platform compatibility.

Note:

  • This is a vertical screen. Linux systems such as Raspberry Pi can rotate the screen through the config.txt configuration file. The configuration file is shown below. When the Windows system is used in the first time, please rotate the screen angle in the system.
  • When using the Raspberry Pi to supply power the screen, you need to ensure that the Raspberry Pi has sufficient power supply capacity. The screen will consume about 0.5A@5V of current, so please pay attention to the power supply output of the wall adapter. You must still ensure the The Raspberry Pi works stably.
  • The screen’s micro-USB port and mini-HDMI port must be connected to the same device to ensure that the signals share the same GND, otherwise problems such as splash screens will occur.

SPECIFICATION

  • Screen Size: 10.1 “
  • Screen Resolution: 800 × 1280 (WXVGA)
  • Video Signal Interface: Mini-HDMI
  • Screen Color: 16.7M colors
  • Brightness: 200cd / m2 (support 0 ~ 100 classification)
  • Working Current: 5V @ 500mA (micro-USB)
  • Screen: 16.7M colors
  • Support System: Linux / Windows / MacOS
  • Screen Size: 245mm × 160mm × 9mm
  • Display Area: 135.36mm × 216.68mm

DOCUMENTS

SHIPPING LIST

  • 10.1″ 800×1280 mini-HDMI IPS Display x1
  • Mini-HDMI to HDMI cable x1
  • Mini-HDMI to Micro-HDMI cable x1
  • Micro-USB cable x1

商品評價

目前沒有評價。

搶先評價 “10.1 吋 IPS 800×1280 mini-hdmi 樹莓派 高清液晶螢幕 支援樹莓派 4 與 windows”

發佈留言必須填寫的電子郵件地址不會公開。 必填欄位標示為 *