特價

1.5吋 OLED 液晶顯示模組 白字 SSD1327 IC 驅動 I2C 通信 Arduino STM32 可用

NT$380 NT$330

15 件庫存

貨號: LCR-004143 分類: 標籤: ,

描述

1.5吋 OLED 液晶顯示模組 白字 SSD1327 IC 驅動 I2C 通信 Arduino STM32 可用

1.5吋 OLED 液晶顯示模組  OLED顯示模塊,1.5英寸對角線,128×128像素,16位灰度級,通過I2C接口進行通信。128×128高分辨率,更清晰的顯示。板載轉換晶片為5V / 3.3V MCU 256級對比度可設置 常用的IIC接口支持16位灰度級顯示,這使得畫面的深度感更強,更逼真。

1.5吋 OLED 液晶顯示模組 採用  SSD1327是一款單晶片CMOS OLED / PLED驅動器,帶有控制器,用於有機/聚合物發光二極管點陣圖形顯示系統。它由128個段和128個公共組成。該IC設計用於共陰極型OLED / PLED面板。

1.5吋 OLED 液晶顯示模組

參數:

  • 驅動晶片:SSD1327 
  • 接口:2線IIC接口
  • PCB模塊尺寸: 34.30mm * 48.5mm * 1.6mm 
  • 模塊接口:I2C 
  • 顯示顏色:白色
  • 灰度:16位
  • 高分辨率:128×128 
  • 視角:大於160° 
  • 工作電壓:3.3V / 5V 
  • 模塊尺寸:45.5 * 34.3(mm)
  • 選項:可設置256級對比度

 

  • 分辨率:128 x 128矩陣面板
  • 嵌入式128 x 128 x 4位SRAM顯示緩衝器
  • 16灰階
  • 引腳可選MCU接口
  • 屏幕保持水平和垂直方向的連續滾動功能
  • 可編程幀速率
  • 可編程多路復用比率
  • 行重新映射和列重新映射
  • 片上振盪器上
  • 電複位(POR) COG,COF的晶片佈局
  • 工作溫度範圍廣:-40°C至85°C 

1.5吋 OLED 液晶顯示模組 函數庫 https://www.arduinolibraries.info/libraries/u8g2

  • Manual and data download link: https://drive.google.com/open?id=19LAGdkv_pw9T9SwnTg2OKHPPKeMfytcb. You can try use the library “U8G2” – Do NOT try to use the older superseded U8G Library – it simply does not include the needed setup info for this module. When using the U8G2 library, use the following Constructor line in your sketch: U8G2_SSD1327_EA_W128128_1_HW_I2C u8g2(U8G2_R0, /* reset=*/ U8X8_PIN_NONE);
  • 1.5″ IIC OLED MODULEOLED: 1. for any platform which has the IIC interface; 2. 128*128 dots included in the OLED screen; 3. 256 level contrast can be set; 4. On board level conversion chip for 5V/3.3V MCU.
  • SSD1327 Driver Chip: SSD1327 is a single-chip CMOS OLED/PLED driver with controller for organic/polymer light emitting diode dot-matrix graphic display system. It consists of 128 segments and 128 commons. This IC is designed for Common Cathode type OLED/PLED panel.
  • High resolution: 128×128; Viewing angle: greater than 160°; Operating voltage: 3.3V / 5V; Module size: 45.5×34.3 (mm). Supports for 16-bit grey level display which makes the sense of depth of the picture more stronger and more realistic.
  • Driver chip: SSD1327; Module interface: I2C; Display color: white; Gray scale: 16 bits; On board level conversion chip for 5V/3.3V MCU; 256 level contrast can be set; commonly used IIC interface.

I2C OLED Display Module 1.5inch OLED Module Arduino LCD Display SSD1327 Driver Chip, 128×128 Pixels, 16-bit Grey Level with I2C interface,DC 3.3V/ 5V for Arduino

Parameter:

  • Driver chip: SSD1327
  • Interface: 2 wire IIC interface
  • PCB Module size: 34.30mm * 48.5mm * 1.6mm
  • Module interface: I2C
  • Display color: white
  • Gray scale: 16 bits
  • High resolution: 128×128
  • Viewing angle: greater than 160°
  • Operating voltage: 3.3V / 5V
  • Module size: 45.5 * 34.3 (mm)
  • Option:256 level contrast can be set

Features:

  • This is a general OLED display Module, 1.5inch diagonal, 128×128 pixels, 16-bit grey level, communicating via I2C interface.
  • 128×128 high resolution, clearer display.
  • On board level conversion chip for 5V/3.3V MCU
  • 256 level contrast can be set
  • commonly used IIC interfaceSupports for 16-bit grey level display which makes the sense of depth of the picture more stronger and more realistic.
  • SSD1327 is a single-chip CMOS OLED/PLED driver with controller for organic/polymer light emitting diode dot-matrix graphic display system. It consists of 128 segments and 128 commons. This IC is designed for Common Cathode type OLED/PLED panel.
  • Resolution: 128 x 128 matrix panel
  • Embedded 128 x 128 x 4 bit SRAM display buffer
  • 16 gray scale
  • Pin selectable MCU Interfaces
  • Screen saving continuous scrolling function in both horizontal and vertical direction
  • Programmable Frame Rate
  • Programmable Multiplexing Ratio
  • Row Re-mapping and Column Re-mapping
  • On-Chip Oscillator
  • Power On Reset (POR)
  • Chip layout for COG , COF
  • Wide range of operating temperature: -40°C to 85°C

商品評價

目前沒有評價。

搶先評價 “1.5吋 OLED 液晶顯示模組 白字 SSD1327 IC 驅動 I2C 通信 Arduino STM32 可用”

發佈留言必須填寫的電子郵件地址不會公開。 必填欄位標示為 *