0 ITEMS查看購物車
-11%
Fermion: LWLP5000 Differential Pressure Sensor – ±500pa 壓差感測器
原始價格：NT$1,730。NT$1,540目前價格：NT$1,540。 (未稅)
- 描述
- Size Guide
- 評價 (0)
描述
描述
Fermion: LWLP5000 Differential Pressure Sensor – ±500pa 壓差感測器
這款高解析度的差壓分壓板，配備了I2C通訊，用於測量設備上兩個點之間的壓力差異。內部封裝了高性能的MEMS壓力晶片和特殊的調理晶片。它能提供兩個點之間的比較測量。此外，感測器IC採用獨特的多級溫度補償算法，以減少環境對感測器輸出的影響。
注意：為了確保測量解析度和感測器壽命，請在乾淨的空氣中使用感測器。請勿讓水進入感測器的噴嘴，否則會損壞感測器。
特點：
- 多級溫度補償算法
- I2C數字輸出
- 高解析度
應用：
- 家庭醫療護理設備
- 可攜式醫療設備
- 醫療監測
- 工業控制
- 中央通風系統
規格：
- 工作電壓：3.3V~5V
- 測量範圍：±500帕（±1.5%FS）
- 工作電流：<5毫安
- 通訊模式：I2C
- I2C地址：0x00
- 工作溫度範圍：-40℃~85℃
- 溫度補償範圍：-5℃~65℃
- 尺寸：14.524mm / 0.570.94英寸
文件
Fermion: LWLP5000 Differential Pressure Sensor – ±500pa (Breakout)
INTRODUCTION
This high-resolution differential pressure breakout board with I2C communication is used to measure the difference in pressure across two points on a device. A high-performance MEMS pressure chip and a special conditioning chip are encapsulated inside the sensor. It will give you a comparative measurement between two points. Besides, the sensor IC adopts a unique multi-stage temperature-compensation algorithm to reduce the effect of the environment on the sensor output.
Note: In order to ensure the measurement resolution and the sensor life, please use the sensor in the clean air. Do not let water enter the nozzle of the sensor, or it will cause damage to the sensor.
Here is a review for this differential pressure sensor, click here to read more.
FEATURES
- Multi-stage temperature-compensation algorithm
- I2C digital output
- High resolution
APPLICATIONS
- Home medical care equipment
- Portable medical equipment
- Medical monitoring
- Industrial control
- Central ventilation system
SPECIFICATION
- Operating Voltage: 3.3V~5V
- Measuring Range: ±500pa（±1.5%FS）
- Operating Current: <5mA
- Communication Mode: I2C
- I2C Address: 0x00
- Operating Temperature Range: -40℃~85℃
- Temperature-compensation Range: -5℃~65℃
- Dimension: 14.5*24mm/0.57*0.94”
商品評價
目前沒有評價。